liquistop spill barrier systems are a low cost solution to contain spills, sprinkler water run-off and contaminated fire-fighting water. By sealing off doorways or other openings, contaminated liquids and hazardous material are contained in the immediate room or area.
The spill barrier liquistop-k consists of a hinged barrier body with a lever mounted on the top and two mounting devices to the left and to the right. The piers are bolted to the floor and wall and are tightly sealed against the building and structure. The trapezodial spill barrier body is made from a integral hollow profiled aluminium. A highly flexible seal is continuously affixed along the bottom side. During stadby the spill barrier rests up right in a secured position.
In the event of an emergency the weight compensated spill barrier is lowered from its stand by position and placed into the mounting devices. The spill barrier is pulled towards the ground by a lever whereby the seal will be compressed to 20-30%. Leak tightness is thus ensured. Mounts and spill barrier body are aluminium based and powder coated in yellow (RAL 1028). Relevant steel parts are galvanised.
lq - k / item number lq6890 infront of the opening