liquistop spill barrier systems are a low cost solution to contain spills, sprinkler water run-off and contaminated fire-fighting water. By sealing off doorways or other openings, contaminated liquids and hazardous material are contained in the immediate room or area.
The spill barrier liquistop-s consists of a barrier body with levers mounted on the top, two mounting devices to the left and to the right. The mounts are bolted to the floor and wall and are tightly sealed against the building or structure. The spill barrier body is made from a rectangular, integral hollow profiled aluminium. A highly flexible seal is continuously affixed along the bottom side.
In the event of an emergency the spill barrier is removed from its stand by position and placed between the mounts. The spill barrier lq-s is pulled towards the ground by levers whereby the seal will be compressed to 20-30%. Leak tightness is thus ensured. Mounts and barrier body are aluminium based and powder coated in yellow (RAL 1028). Relevant steel parts are galvanised.
lq - s / item number lq6850 al - infront of the opening